Verified product-page source (readable static HTML text snapshot)
Source: https://powergenserv.com/equipment/generators/cummins/c80-n6/
Original HTML SHA-256: cc47ad99ad943990ffa13c91d08393b56e584a5f24d3a49b9b863e53c5680d53
Overview #
The Cummins C80 N6 is an 80 kW standby natural gas generator set sold as part of the Quiet Connect RS80 series. It is built on the QSJ5.9G spark-ignited engine -- a 5.9-liter, inline-6-cylinder, turbocharged and aftercooled platform that Cummins also uses in the C100 N6. The C80 N6 ships standard in a sound-attenuated aluminum enclosure rated at 73 dB(A) at 23 ft, making it one of the quieter options in its class for suburban commercial and light-industrial installations.
The generator is certified to EPA Stationary Emergency standards (40 CFR 60), listed to UL 2200, and is NFPA 110 capable when properly installed with the required accessories. It accepts single-step load pickup per NFPA 110 requirements. The PowerCommand 1.1 control provides isochronous governing, automatic remote start/stop, output metering, and self-diagnostics. The enclosure is wind-rated to 180 mph per ASCE 7-10 and carries IBC Seismic certification.
The C80 N6 targets smaller commercial installations -- professional office buildings, small medical clinics, restaurant facilities, and light-industrial buildings -- where 80 kW of standby capacity is sufficient and acoustic performance is important. It is frequently specified alongside a Cummins RA or RSS automatic transfer switch.
Technical Specifications #
Parameter Value
Standby Rating 80 kW (100 kVA)
Frequency 60 Hz
Engine Model QSJ5.9G
Displacement 5.9 liters (359 in³)
Configuration Inline 6, cast iron block
Aspiration Turbocharged and aftercooled
Bore x Stroke 102.1 mm x 119.9 mm (4.02 x 4.72 in)
Rated Speed 1800 rpm
Overspeed Limit 2250 rpm
Starting System 12 VDC, 850 CCA battery
Battery Charging Alternator 52 amps
Lube Oil Filter Spin-on with relief valve
Cooling Set-mounted radiator, 50 C ambient design
Control PowerCommand 1.1
Enclosure Aluminum, Sound Level 1
Open Set Weight (wet) 1,173 kg (2,587 lbs)
SL1 Enclosure Weight (wet) 1,262 kg (2,782 lbs)
Dimensions (L x W x H) 118.7 x 40.0 x 58.3 in (3016 x 1016 x 1480 mm)
Sound Level 73 dB(A) at 23 ft with SL1 enclosure
Natural gas fuel consumption (CFH at 905 Btu/ft³):
Load CFH
25% 455
50% 679
75% 877
100% 1,084
Fuel inlet pressure: 6.0 to 14.0 in WC (1.5 to 3.5 kPa) at the engine connection.
Available voltage configurations:
1-phase: 120/240V
3-phase: 120/208V, 120/240V, 277/480V
Our Service Experience #
The C80 N6 is a straightforward unit to maintain. The QSJ5.9G engine shares its basic architecture with Cummins' broader B/QSB diesel family adapted for gas, meaning parts availability is strong and technicians familiar with Cummins gas engines adapt quickly. The 12V single-battery starting system is simpler than the 24V systems on larger units, but battery condition is still the most common cause of fail-to-start events -- we recommend annual battery load testing and replacement every 3-4 years in commercial standby service.
The sound-attenuated aluminum enclosure does a good job at 73 dB(A), but the intake and exhaust baffles require periodic inspection to confirm no debris accumulation. The aluminum construction resists corrosion well, which matters in coastal installations. Fuel inlet pressure must be verified in the 6-14 in WC range under operating load -- we have seen units at the edge of this range develop fuel-lean conditions under high ambient temperatures that affect transient response.
Frequently Asked Questions #
What is the standby power rating of the C80 N6? 80 kW (100 kVA) at 60 Hz, 0.8 power factor, tested per NFPA 110. This rating applies for the duration of a utility power interruption with no sustained overload capability.
What engine does the C80 N6 use? The Cummins QSJ5.9G -- a 5.9-liter, inline-6, turbocharged and aftercooled spark-ignited natural gas engine. The same engine platform (at a higher power rating) powers the C100 N6. It operates at 1800 rpm with an overspeed limit of 2250 rpm.
What voltages does the C80 N6 support? Single-phase 120/240V and three-phase 120/208V, 120/240V, and 277/480V. The alternator is 12-lead reconnectable for field voltage adjustment.
How much natural gas does the C80 N6 consume at full load? Approximately 1,084 CFH (standard cubic feet per hour) at 100% load, based on 905 Btu/ft³ gas. At 75% load the consumption drops to 877 CFH, and at 50% load to 679 CFH.
Is the C80 N6 compliant with NFPA 110? The C80 N6 is NFPA 110 capable when equipped with the necessary accessories and properly installed. The PowerCommand 1.1 control supports Level 1 compliance. Confirm with your installing contractor that all required accessories (coolant heater, battery charger, transfer switch) are properly specified.
What enclosure does the C80 N6 come with? The standard Quiet Connect RS80 enclosure is an aluminum Sound Level 1 enclosure rated at 73 dB(A) at 23 ft. An upgrade to Sound Level 2 is available as an accessory kit. The enclosure is wind-rated to 180 mph per ASCE 7-10 and carries IBC Seismic certification.
Engineering specifications
Physical
Length 119 in
Width 40 in
Height 58 in
Wet weight 2,587 lb
Acoustic
Enclosure Sound-attenuated
Documents & downloads
Spec sheets & manuals
Spec sheet (datasheet)
Installation manual
Operator manual
Ready to order this model?
Configure your Cummins C80 N6
Lock the enclosure, fuel system, transfer switch, and add-ons — we'll confirm pricing, availability, and lead time within one business day. Prefer a free-form quote? That option is still here.
Configure & Quote → Just request a quote Download datasheet
Estimate runtime for the Cummins C80 N6
Adjust load percent and tank size to estimate runtime. Pre-filled with this model's spec where available.
Estimate runtime on this tank
Generator size
kW
Fuel
Diesel Natural Gas
Load
25 % load 50 % load 75 % load 100 % load
Fuel demand at 75 % load
840,000 BTU/hr ≈ 840.0 cf/min @ 1,000 BTU/cf
On utility natural gas the runtime is generally unlimited provided the supply line and meter can deliver this BTU/hr at the engine's required inlet pressure (typically 5–14" WC residential, up to 5 psi commercial). Confirm against the OEM's published fuel-pressure spec.
Service intervals
Manufacturer-recommended intervals for the Cummins C80 N6 under standby duty. Field intervals may differ based on load profile, ambient conditions, and fuel quality.
Oil & filter Every 500 hours or 12 months
Air filter Every 500 hours
Spark plugs Every 1000 hours
Major overhaul ≈ 30,000 hours
Common failure modes
What we've seen fail on this platform. Use as a service-planning reference, not a diagnostic — actual failure modes depend heavily on duty cycle and maintenance history.
Component Symptom Typical hours Severity
Spark plugs (6 cylinders) Misfiring, rough idle, increased emissions under load — minor
Fuel regulator / mixer Rich or lean running, unstable speed at light loads — moderate
Battery (12V, 850 CCA) Slow crank, fail-to-start fault on cold mornings — minor
Coolant hoses and fittings Coolant weeping at joints, low coolant level alarm — moderate
Frequently Asked Questions
What engine does the Cummins C80 N6 use? The C80 N6 uses the Cummins QSJ5.9G — a 5.9-liter, inline-6-cylinder, turbocharged and aftercooled spark-ignited natural gas engine. It is the same engine platform (at lower power calibration) used in the C100 N6. Rated at 1800 rpm with an overspeed limit of 2250 rpm.
What are the standby and prime ratings of the C80 N6? Standby rating is 80 kW (100 kVA) at 60 Hz, 0.8 power factor. This is an Emergency Standby Power (ESP) rating — no sustained overload capability is available. The unit is also EPA certified for stationary emergency use.
What are the service intervals for the C80 N6? Oil and filter changes are due at 500 hours or 12 months, whichever comes first. Air filter replacement at 500-hour intervals. Spark plug replacement is recommended at 1,000-hour intervals for all 6 cylinders. Major overhaul interval is 30,000 hours.
What are the advantages of natural gas over diesel at 80 kW? Natural gas eliminates diesel fuel storage, delivery logistics, and fuel stability concerns during extended standby periods. There are no diesel spill or containment permit requirements. For commercial sites in California with natural gas service, the C80 N6 often has lower permitting complexity and no above-ground storage regulations.
Is the C80 N6 CARB compliant for California installations? The C80 N6 is EPA certified for stationary emergency use under 40 CFR 60. California CARB compliance for stationary emergency generators depends on engine tier, annual operating hours, and local air district rules — particularly in Bay Area BAAQMD and SoCAL SCAQMD jurisdictions. Consult your air district for current permit requirements before installation.
Can PowerGen service the C80 N6 in Northern California? Yes. PowerGen provides authorized Cummins service for natural gas generator sets across the San Francisco Bay Area, Silicon Valley, and Northern California. We carry QSJ5.9G parts, perform spark plug service, fuel system inspection, and load bank testing for C80 N6 installations. Contact us for maintenance scheduling.
Compatible equipment
Transfer switches
ASCO 300 Series ATS Automatic Transfer Switches
ASCO 7000 Series Transfer Switch Automatic Transfer Switches
Eaton ATC-900 Automatic Transfer Switches
Thomson TS870 Automatic Transfer Switch Automatic Transfer Switches
Thomson TS920 Automatic Transfer Switch Automatic Transfer Switches
More in the Cummins N6 Commercial Gas
80–500 kW natural gas standby from Cummins — six models from light commercial through large industrial, with single-source OEM integration.
View all 6 models in this series →
Similar models
Cummins
Cummins C60 N6
60 kW natural gas with full Cummins vertical integration. QuietConnect-class sound levels. No diesel storage needed.
60 kW standby · Natural Gas / LPG · Liquid-cooled
60 kW natural gas/propane standby generator with Cummins QSJ5.9G 5.9L inline-6 engine. PowerCommand 1.1 control, UL 2200 listed, NFPA 110 Level 1 capable. Sound-attenuated aluminum enclosure.
EPA Stationary Spark Ignition 3-phase commercial-standby retail
Compare
Cummins
Cummins C100 N6
100 kW natural gas with full Cummins vertical integration. 100% load in 10 seconds. No diesel logistics.
100 kW standby · Natural Gas / LPG · Liquid-cooled
100 kW natural gas standby generator with QSJ5.9G-G3 engine. 100 kW / 125 kVA standby, PowerCommand controls, AmpSentry protection, UL 2200, EPA certified. Dry weight 2812 lbs.
3-phase commercial-standby industrial-standby
Compare
MTU
MTU 10V0068 GS100
100 kW NG/LP standby on MTU's own 6.8L V10. Dual-fuel capable, compact under 87 in, 3-way catalyst, no diesel storage needed.
100 kW standby · Natural Gas / LPG · Liquid-cooled
100 kW natural gas standby generator with MTU 6.8LT V10 engine, 6.8 L turbocharged 10-cylinder V, dual-fuel capable (NG/LP), 1800 rpm. 3-way catalyst, EPA compliant.
EPA Non-Road Spark Ignition 3-phase commercial-standby light-industrial
Compare
Services for the Cummins C80 N6
Generator Maintenance
NFPA 110 Compliance
Load Bank Testing
Need service or parts for the Cummins C80 N6?
We service every major OEM and stock genuine parts for the most common models.
Get A Quote Or call (209) 229-1990
Last reviewed: May 14, 2026